Features: Pyle PLMRA220 2 Channel 600 Watt Sub Amp Amplifier
300 watts x 2 output
600 watts x 1 bridged output
Blue LED level display
LED protection indicator
Power LED indicator
Variable bass boost
Variable Hi/Lo electronic crossover network
Variable input level (Gain) control
Thermal, Overload, Short circuit protection
Dimensions (W x H x L) 10.9 x 2.7 x 8.25
Features: Pyle PLMRA120 Waterproof Marine Amplifier
Variable Input Gain Control
IC Power 120 Watts x 2 Output
High/Low Level Input
Power ON LED Indicator
Remote Turn On/Off
Speaker Output Connector Gold Plated RCA Inputs
Thermal / Overload / Short Circuit Protection
Heavy Duty Aluminum Alloy Heatsink
Load Dump
Over Voltage Thermal Shutdown AC/DC Short Circuit Protector
Dimensions; 7.87 inches W x 2 inches
H x 5.20 inches L
Features: Pyle PLMRA400 4 channel marine amplifier
IC Power 100 Watts x 4 Output
Variable Input Gain Control
Power ON LED Indicator
High/Low Level Input
Remote Turn On/Off
Speaker Output Connector
Gold Plated RCA Inputs
Thermal / Overload / Short Circuit Protection
Heavy Duty Aluminum Alloy Heatsink
Load Dump Over Voltage
Dimensions; 7.87"W x 2"H x 8.0"L
Features: PYLE PLMR440PA 4 Channel Marine Power Amplifier/Public Address System
Maximum Power 1200 Watts
RMS Power 150 Watts x 4 @ 4 Ohms
Power and Protection LED
Line and Speaker Level Inputs
Bridgeable Trimode Operation
Variable Gain Controls
Variable Low Pass Crossovers Fixed High Pass Crossovers
0-+18dB Variable Bass Boost
Input Voltage Sensitivity Selectors
PCB with Conformal Coating
Waterproof Hardwired Input/Output and Speaker Cables
Balanced Microphone Input
Remote Subwoofer Control
Signal-to-noise Ratio; better than 102 dB
Dimensions; 12-3/4''W x 7-3/8''D x 2-1/4''H
Features: Pyle PLMRCAP18 1.8 F 20V Round Marine Capacitor
Aluminum Brushed Case
Blue Digital Display
PVC sleeve and blister package
Dimensions; 8.66"H x 2.99"W
Features: Bazooka MAA1500 Marine 750 watt MONO Amplifier w/Subsonic Filter
Power Handling 750 watts
Frequency Response 25HZ-130HZ
DC Offset Protection
This circuit protects the output of the amplifier against DC voltage. If for some reason DC voltage is detected at the output stage, the amplifier will shut down protecting the speakers from direct current.
Short Circuit Protection The circuit protects the amplifier from damage due to a short found in the speakers or
wiring. If one of the speakers or its wiring comes in contact w/ground, the amplifier will shut down. To resume normal operation, correct the problem and turn the head unit off, then back on. The amplifier will reset and play again.
Thermal Protection
To protect the amplifier circuitry against damage caused by prolonged exposure to high temperatures, a thermal protection circuit is activated if the amplifier reaches
excessively high operating temperature. Once the thermal circuit is activated, the amplifier will shut down to cool off. The amplifier will automatically turn back on once it cools down to a safe operating temperature.
Built-in Crossover
The "MAA"amplifiers include a built-in variable **high and low pass crossovers. The crossover features a variable frequency selection (50Hz - 250Hz) for precise high or low pass filtering. **Except 1500 which has a 50 - 250Hz low pass filter.
Bass Boost
For added low frequency performance the amplifiers are equipped w/switchable 6 or 12dB bass boost @ 45Hz.
Line Out ( MAA1500)
One set of full range line outputs have been provided for convenient connection to additional amplifiers in the system.
Subsonic Filter ( MAA1500)
A subsonic filter has been provided to filter out unwanted subsonic bass frequencies below the audible range of the subwoofer. This feature helps to improve the amplifier's overall performance since power is not wasted reproducing frequencies beyond the speakers'
normal operating range. This feature works in conjunction w/the Low-pass crossover to provide band-pass filtering.
Phase Adjustment (MAA1500)
The phase switch allows for 0 or 180 degree phase adjustment for the woofers. In most systems, this phase adjustment should be set at 0 degrees. The 180-degree setting is only needed if the subwoofers are out of phase w/the satellite speakers in the boat.
Power Fusing
This protects the amplifier against short circuits and excessive current.
Remote Turn-on Automatically turns amplifier on when connected to the head unit's remote output. The amplifier will turn on and off w/the head unit to save current consumption. This control also operates the reset circuit for the amplifier's protection. It must be connected w/the head unit in order to reset protection circuits.
Adjustable Input Sensitivity
Allows you to fine-tune the level matching between your source and the power amplifier.
Set Currency: 
Cart
